Peugeot 307 T3T4 Turbo Charger Kit
стоиомость 983 бакса.Показувати
Brand new “Street Demon” Series turbo package for your vehicle. The most complete turbo package available for the price. This package has all new quality parts that are capable of producing well beyond 485 horsepower at 25+ PSI with supporting modifications and a built motor. This is the most complete package available compared to others at an affordable price. On a stock motor the kit will create give the motor a 50-100 horsepower gain on a low boost setting of 8 PSI. Also, the included electronic turbo timer provides a hassle-free operation of precisely calculating the cool down period to ensure a proper cool down for your turbocharged motor. Works with either automatic or manual gearboxes. This kit may allow you to keep your air conditioning and power steering for a great street setup.
(1) Hybrid Turbo Charger:
*
.57 compressor wheel trim mapped for low & high boost setups
*
Oil fitting gaskets & mounting studs included
*
Capable of producing over 450 horsepower
*
Wet float bearings & properly balanced
*
3" inlet diameter with a 2" outlet
*
.50 A/R compressor housing
*
.63 A/R turbine housing
*
1/8 NPT oil inlet
*
T3/T4 hybrid
(1) Front Mount Intercooler:
* Large design cools down the turbocharged air efficiently
* Strong TIG welds will support high PSI levels
* Lightweight aluminum racing intercooler
* Extra thick core provides ample cooling
* 2.5" cold outlet & 2.5" hot inlet
* Less then 2% pressure drop
(1) Universal Intercooler Piping Kit:
* Lightweight yet strong aluminum piping
* May necessitate light modification to fit
* (16) stainless steel worm gear clamps
* (2) 2.5” 90 degree silicone couplers
* (6) 2.5” straight silicone couplers
* (2) 90 degree 2.5” bends
* (2) 60 degree 2.5” bends
* (2) 45 degree 2.5” bends
* (2) straight 2.5” pipes
(1) Turbo Oil Line Install Package:
* T fittings will fit almost any motor & still use factory oil pressure sending unit
* Necessary fittings and clamps for a complete installation
* 18 inch 5/8” high temperature 550psi oil return line
* Premium gaskets & hardware for the turbocharger
* 77 inch straight high strength oil feed line
* Strong "T" fitting to hook up to block
* Superior quality lasts a lifetime
* Retails for $229 in magazines
* High quality oil feed fittings
* High quality turbo oil drain
* Brand new turbo install kit
* 36 inch angle oil fee line
(1) Boost Controller:
* Can be setup to adjust boost PSI on the fly
* Can be adjusted for any PSI level desired
* Control your boost with a precise click
* Includes complete install kit
* Anodized aluminum finish
* CNC machined design
(1) Blow Off Valve:
* Protects turbo by venting when shifting and/or reducing throttle
* Performance design produces a powerful & aggressive sound
* Quality design will not leak under high boost conditions
* Flanges installed at user discretion
* Includes complete install kit
(2) Slim Cooling Fan:
* Fan can be used to cool: A/C condenser, oil or transmission cooler, mounting on an intercooler to prevent heat soak, or cooling a a2w radiator
* Slim design provides excellent engine bay clearance
* Includes the mounting tabs for a easy zip tie install
* Reversible design can either pull or push air
* Versatility of a push/pull reversible fan
* Superior flow of a curved-blade design
* Creates additional aftermarket cooling
* 1.25" thick outside perimeter
* 2.50" thick inside perimeter
(1) Electronic Turbo Timer:
* Ensures a proper cool down for your turbocharged car every time
* Includes pigtail wiring and extra wiring for ease of installation
* Important to preventing premature turbo wear and failure
* Mounted inside the vehicle for on the fly adjustments
* Precisely calculates the cool down period for the motor
* Auto mode feature creates a hassle-free operation
* Increases turbocharger's operating lifespan
* Bright Easy to read LED Digital Display
* Failure to reduce the temperature of the turbo could result in "coking" of oil inside the turbo
* Coking is the baking of oil, turning it into a grimy substance
(1) Fuel Pressure Regulator:
* Great to setup fuel pressure for boosted engines
* Includes complete install kit
* Precision pressure gauge
* Fully adjustable
(1) Catch Can:
* Stops excess oil from blowing to the intake manifold
* Ensures better mileage & better performance
* Removes oil vapors from breather line
* Show like high quality polish
* Includes complete install kit
(1) Billet Aluminum High Flow Fuel Filter:
* CNC machined T6-6061 billet aluminum construction
* High flow capacity for demanding fuel systems
* Strong brackets for easy mounting
* High pressure fuel fittings
* Anodized show like finish
* Filter can be cleaned
* 6an sized fittings
* Removable filter
(1) 35mm Wastegate:
* Protect the turbo system from over boosting by venting surges
* Includes complete install kit featuring gaskets and flanges
* Strong construction provides years of reliable service
* Anodized show like finish
* 2 bolt flange style
(1) 10 Meters Heat Wrap:
* Heat powers the turbochargers turbine inlet. Keep the heat inside the exhaust pipes
* Heat kills the turbochargers compressor inlet. Keep the heat out of the cold piping.
* Control additional engine bay heat and prevent overheating.
* Keep intercooled air cooled.
* Made of very high temp fiberglass.
(1) Stainless Downpipe:
* 2.5" Inlet
* Waterjet cut 5 bolt flange.
* Mandrel bent stainless steel
* Beautiful TIG welds
(1) Radiator Hose Sleeving Kit:
* Stainless braiding makes rubber radiator hoses up to 5x stronger
* Makes engine bay look of show car quality
* Strong construction provides years of reliability
* Anodized ends for the authentic race like finish
(1) High Flow Intake Filter:
* Protect the turbo system from debris
* Instant HP adder
* Extreme high flow
* 3" inlet perfectly matching the turbocharger inlet
(1) High Flow Breather Cap:
* Extreme high flow
* Keeps crankcase ventilation clean for emissions
* Works in conjunction with the catch can to keep inside of turbo piping oil free
(1) Wastegate Positioning Adapter:
* Allows adjustability for wastegate placement.
* Laser cut flanges.
* Mandrel bent stainless steel.
* Strong construction provides years of reliable service
* Beautiful TIG welds
* 2 bolt flange style
(1) Wastegate Dump Tube:
* Allows wastegate exhaust gases to cleanly exit the engine bay.
* Laser cut flanges.
* Mandrel bent stainless steel.
* Strong construction provides years of reliable service
* Beautiful TIG welds
* 2 bolt flange style
(1) Coolant Sensor Bung
* Monitor the water temperature via this sensor relocation
* Easy solution to run aftermarket coolant sensor
* Provides more precise readings then the stock location
* Features 2 installation clamps for an easy add on
* 38mm ends fits most OEM coolant hoses
* Strong Aluminum construction
(1) Non-divided T3 Flange
* Water jet cut for precision flow
* Mild steel for easy welding to an adapter pipe or direct to stock manifold
(1) Hybrid Turbo Charger:
*
.57 compressor wheel trim mapped for low & high boost setups
*
Oil fitting gaskets & mounting studs included
*
Capable of producing over 450 horsepower
*
Wet float bearings & properly balanced
*
3" inlet diameter with a 2" outlet
*
.50 A/R compressor housing
*
.63 A/R turbine housing
*
1/8 NPT oil inlet
*
T3/T4 hybrid
(1) Front Mount Intercooler:
* Large design cools down the turbocharged air efficiently
* Strong TIG welds will support high PSI levels
* Lightweight aluminum racing intercooler
* Extra thick core provides ample cooling
* 2.5" cold outlet & 2.5" hot inlet
* Less then 2% pressure drop
(1) Universal Intercooler Piping Kit:
* Lightweight yet strong aluminum piping
* May necessitate light modification to fit
* (16) stainless steel worm gear clamps
* (2) 2.5” 90 degree silicone couplers
* (6) 2.5” straight silicone couplers
* (2) 90 degree 2.5” bends
* (2) 60 degree 2.5” bends
* (2) 45 degree 2.5” bends
* (2) straight 2.5” pipes
(1) Turbo Oil Line Install Package:
* T fittings will fit almost any motor & still use factory oil pressure sending unit
* Necessary fittings and clamps for a complete installation
* 18 inch 5/8” high temperature 550psi oil return line
* Premium gaskets & hardware for the turbocharger
* 77 inch straight high strength oil feed line
* Strong "T" fitting to hook up to block
* Superior quality lasts a lifetime
* Retails for $229 in magazines
* High quality oil feed fittings
* High quality turbo oil drain
* Brand new turbo install kit
* 36 inch angle oil fee line
(1) Boost Controller:
* Can be setup to adjust boost PSI on the fly
* Can be adjusted for any PSI level desired
* Control your boost with a precise click
* Includes complete install kit
* Anodized aluminum finish
* CNC machined design
(1) Blow Off Valve:
* Protects turbo by venting when shifting and/or reducing throttle
* Performance design produces a powerful & aggressive sound
* Quality design will not leak under high boost conditions
* Flanges installed at user discretion
* Includes complete install kit
(2) Slim Cooling Fan:
* Fan can be used to cool: A/C condenser, oil or transmission cooler, mounting on an intercooler to prevent heat soak, or cooling a a2w radiator
* Slim design provides excellent engine bay clearance
* Includes the mounting tabs for a easy zip tie install
* Reversible design can either pull or push air
* Versatility of a push/pull reversible fan
* Superior flow of a curved-blade design
* Creates additional aftermarket cooling
* 1.25" thick outside perimeter
* 2.50" thick inside perimeter
(1) Electronic Turbo Timer:
* Ensures a proper cool down for your turbocharged car every time
* Includes pigtail wiring and extra wiring for ease of installation
* Important to preventing premature turbo wear and failure
* Mounted inside the vehicle for on the fly adjustments
* Precisely calculates the cool down period for the motor
* Auto mode feature creates a hassle-free operation
* Increases turbocharger's operating lifespan
* Bright Easy to read LED Digital Display
* Failure to reduce the temperature of the turbo could result in "coking" of oil inside the turbo
* Coking is the baking of oil, turning it into a grimy substance
(1) Fuel Pressure Regulator:
* Great to setup fuel pressure for boosted engines
* Includes complete install kit
* Precision pressure gauge
* Fully adjustable
(1) Catch Can:
* Stops excess oil from blowing to the intake manifold
* Ensures better mileage & better performance
* Removes oil vapors from breather line
* Show like high quality polish
* Includes complete install kit
(1) Billet Aluminum High Flow Fuel Filter:
* CNC machined T6-6061 billet aluminum construction
* High flow capacity for demanding fuel systems
* Strong brackets for easy mounting
* High pressure fuel fittings
* Anodized show like finish
* Filter can be cleaned
* 6an sized fittings
* Removable filter
(1) 35mm Wastegate:
* Protect the turbo system from over boosting by venting surges
* Includes complete install kit featuring gaskets and flanges
* Strong construction provides years of reliable service
* Anodized show like finish
* 2 bolt flange style
(1) 10 Meters Heat Wrap:
* Heat powers the turbochargers turbine inlet. Keep the heat inside the exhaust pipes
* Heat kills the turbochargers compressor inlet. Keep the heat out of the cold piping.
* Control additional engine bay heat and prevent overheating.
* Keep intercooled air cooled.
* Made of very high temp fiberglass.
(1) Stainless Downpipe:
* 2.5" Inlet
* Waterjet cut 5 bolt flange.
* Mandrel bent stainless steel
* Beautiful TIG welds
(1) Radiator Hose Sleeving Kit:
* Stainless braiding makes rubber radiator hoses up to 5x stronger
* Makes engine bay look of show car quality
* Strong construction provides years of reliability
* Anodized ends for the authentic race like finish
(1) High Flow Intake Filter:
* Protect the turbo system from debris
* Instant HP adder
* Extreme high flow
* 3" inlet perfectly matching the turbocharger inlet
(1) High Flow Breather Cap:
* Extreme high flow
* Keeps crankcase ventilation clean for emissions
* Works in conjunction with the catch can to keep inside of turbo piping oil free
(1) Wastegate Positioning Adapter:
* Allows adjustability for wastegate placement.
* Laser cut flanges.
* Mandrel bent stainless steel.
* Strong construction provides years of reliable service
* Beautiful TIG welds
* 2 bolt flange style
(1) Wastegate Dump Tube:
* Allows wastegate exhaust gases to cleanly exit the engine bay.
* Laser cut flanges.
* Mandrel bent stainless steel.
* Strong construction provides years of reliable service
* Beautiful TIG welds
* 2 bolt flange style
(1) Coolant Sensor Bung
* Monitor the water temperature via this sensor relocation
* Easy solution to run aftermarket coolant sensor
* Provides more precise readings then the stock location
* Features 2 installation clamps for an easy add on
* 38mm ends fits most OEM coolant hoses
* Strong Aluminum construction
(1) Non-divided T3 Flange
* Water jet cut for precision flow
* Mild steel for easy welding to an adapter pipe or direct to stock manifold
ты две недели мучал всех передком слегка поцарапанным и пытался от нас услышать, что повело лонжероны. А теперь ты хочешь забадать мозг и себе и всем как ее втулить, а потом куда пропала тяга 
Леха, не парь себе мозг, ездит машина, вот и наслаждайся и не мешай ей работать 
Не верю!
